Alternating Pressure Mattress with Compressor, 200 x 90 x 7 cm, 130 Cells, Nude

The alternating pressure mattress with compressor, measuring 200 x 90 x 7 cm, is a system consisting of a PVC air bubble mattress with 130 cells and a pump for pressure adjustment. Each air cell has a height of 7 cm, while the mattress material has a thickness of 0.32 mm. The system is designed for short-term therapy and home care use, with sequential inflation and deflation of alternating air cells. The compressor features pressure adjustment through a control knob on the front panel and can be attached to a bed frame using two adjustable hooks.

The PVC mattress measures 200 x 90 x 7 cm and features additional securing flaps measuring 50 cm at the upper end and 50 cm at the lower end. The system can be used with bubble mattresses or alternating cell mattresses. During operation, the compressor inflates and deflates the air cells alternately at intervals of approximately 6 minutes. The pump uses a compact compressor designed for quiet operation and includes a simple front control panel for pressure adjustment.

Features:
• Mattress dimensions: 200 x 90 x 7 cm;
• Material: PVC;
• PVC thickness: 0.32 mm;
• Number of cells: 130;
• Cell height: 7 cm;
• Color: nude;
• Maximum supported weight: up to 135 kg;
• Securing flaps: 50 cm at the top and 50 cm at the bottom;
• Cold resistance: down to -30°C;
• Quiet compressor with front pressure adjustment knob;
• Adjustable hooks for attaching the compressor to a bed frame;
• Alternating cell cycle: approximately 6 minutes.

Applications:
• Short-term therapy use;
• Home care use;
• Use on bed frames suitable for compressor attachment;
• Use with bubble mattresses or alternating cell mattresses.

Instructions for Use:
• Place the mattress on the bed frame with the hose end positioned towards the foot section of the bed frame;
• Secure the pump to the bed frame using the two integrated hooks or place it on a smooth, flat surface;
• Connect the air hoses from the mattress to the compressor;
• Connect the compressor to a wall outlet and make sure the power cable is positioned safely;
• Turn on the power switch located on the compressor control panel;
• After the mattress has inflated, adjust the pressure using the control knob on the pump.

Operating Conditions:
The recommended ambient operating temperature is 10°C to 40°C (50°F to 104°F), with a relative humidity of 10% to 75%.

Storage and Transport Conditions:
The specified ambient temperature for storage and transport is 10°C to 40°C, with a relative humidity of 10% to 75%.

Cleaning and Maintenance:
Clean the mattress regularly using a neutral detergent or alcohol. Heating or steam sterilization is not available for the mattress. Clean the compressor regularly with a neutral detergent or alcohol. Do not open the compressor housing due to the risk of electric shock. Keep the compressor away from water and do not immerse it in liquids.

Package Contents:
• 1 x PVC alternating pressure mattress with 130 air cells and 1 x compressor.

The alternating pressure mattress with compressor combines a 130-cell PVC air mattress, securing flaps, and an adjustable pumping system in one complete set for use according to the specified technical conditions.