Cylindrical drill for dental posts with the diameter 1mm/1.2mm/1.4mm

The cylindrical drill for dental posts is made of stainless steel and has the following diameters: 1mm, 1.2mm, and 1.4mm.

Instructions for use:
Before use, the instrument must be carefully cleaned to remove all residues and plentifully rinsed with running water. The drill must be sterilized using a steam sterilizer at 134°C for 15 minutes to complete the cycle. The drying time is 10 minutes. As regards the ways of sterilization, refer to the instruction, refer to instruction for use supplied by the manufacturer of the sterilizer autoclave. In preparation for sterilization, the device must first be cleaned with running water and then wrapped in sterilization packaging before being placed in the autoclave.
The drills can be used until the cutting -capacity starts to decrease.