PRIMA Class 6 Steam Chemical Indicator Strips for Autoclave, 105x20 mm, 250 pcs

The PRIMA Class 6 chemical indicator strips for autoclave are designed to accurately monitor steam sterilization parameters within professional sterilization cycles. Each strip provides a clear visual response confirming that the correct combination of time, temperature, and steam concentration has been achieved. Each box includes 250 individually printed indicator strips, measuring 105 × 20 mm. The printed rectangular indicator area contains a chemical formulation that is sensitive to steam exposure and changes color once sterilization conditions are met. Operating conditions: • 134 °C for 3.5 minutes. • 121 °C for 15 minutes. During the sterilization process, the indicator reacts to the presence of saturated steam and exposure time. When the required parameters are reached, a visible color transition occurs, allowing quick verification of the autoclave cycle performance without additional measuring devices. Chemical composition: • Water - approx. 35 % (CAS # 7732-18-5). • Diacetone Alcohol - approx. 3 % (CAS # 123-42-2). • Proprietary mixture - approx. 62 % (CAS N/A). These Class 6 indicators contain no hazardous substances according to EU directives. For best preservation, store them in a dry, cool place away from direct sunlight and moisture. Usage instructions: • Place one indicator inside each sterilization pouch, container, or tray. • Position it in the area least accessible to steam for accurate monitoring. • After the cycle, check the color change of the printed area to confirm exposure to sterilization conditions. Safety instructions: • Keep out of reach of children. • Avoid contact with liquids or reactive chemicals. • Use only for professional sterilization monitoring applications. The PRIMA Class 6 steam chemical indicator strips for autoclave are a reliable and standardized method for verifying sterilization cycles. Each pack is sealed and ready for immediate use, providing a consistent and reproducible color response to confirm process parameters.